Restyle - Hotfix Applicator

A hotfix applicator is an electric tool used to attach hotfix stones (such as rhinestones) to fabric or other materials using heat.

Contents

• Base unit
• 6 different attachments for securing rhinestones in the sizes: 2mm, 3mm, 4mm, 5mm, 7mm, and 9mm.
• Includes a large flat attachment of 10mm, for irregular shapes
• Holder to rest the rhinestone applicator on when the device is hot.

Manual

Preparation
1. Ensure the surface is clean, dry, and heat-resistant.

2. Lay the garment or material flat.

3. Select the correct attachment for the size of your rhinestones and screw it firmly onto the applicator.

4. Plug the applicator into the power outlet and let it heat up for 2–3 minutes. Placing the stones
Place the rhinestones with the adhesive side down on the desired spot on the fabric.

(Use tweezers for accuracy).

Using the rhinestone applicator
1. Gently press the warm attachment of the applicator onto the top of the rhinestone.
2. Hold the attachment on the stone for approximately 5–10 seconds, depending on the size.
3. Lift the applicator straight up and allow the stone to cool.
4. Check if the stone is firmly attached. If not, repeat the process.

After application
• Allow the material to cool completely before moving or folding it.
• Wait at least 24 hours before washing the garment.
• Preferably wash by hand or on a cold machine wash cycle, inside out.

Safety tips

The tip of the applicator becomes very hot (over 200°C)!
• Never touch the metal tip. • Always place the applicator on the stand or a heat-resistant surface.

• Allow the device to cool down completely when you are finished and unplug it.